English 35

03 Setup
Musical Room Calibration
By setting the Musical Room Calibration (MRC)
function just once when you relocate or install the
product, you can have the product automatically
recognize the distance between speakers, levels
between channels, and frequency characteristics
to create a 5.1-channel sound fi eld optimized for
your environment.
500mA
ASC IN
500mA
ASC IN
ASC
microphone

Musical Room Calibration Mode

You will hear either the Musical Room Calibration
mode or the User Speaker Settings.
Off: You will hear sound in the Speaker Setting
value.
On : You will hear sound in the Musical Room
Calibration mode.

Measurement

Plug the ASC microphone into the ASC IN jack.
Place the ASC microphone at the listening position.
Musical Room Calibration will be automatically
set up in the following sequence:
Front L
Center
Front R
Surround
R
Surround L
Subwoofer
Press the RETURN button to cancel the
Musical Room Calibration Setting.
•
•
1.
2.
•
•
NOTE
Running the Musical Room Calibration
function takes about 3 minutes.
Make sure there is no disc in the product
when you run the Musical Room Calibration
function.
If the ASC microphone is disconnected
during the Musical Room Calibration setup,
the setup will be canceled.
When the Musical Room Calibration function
is activated, the DSP, Dolby Pro Logic ll and
SFE Mode will not work.
If the product is connected to external
devices or other components (such as an
iPod, AUX, D.IN), the Musical Room
Calibration Setup may not work properly.
Noise may result in incorrect measurements.
Ensure the room is quiet when you run the
Musical Room Calibration.
Place the microphone in the main listening
position.
Make sure there are no objects between the
speakers and microphone.
Note that the test tones of the speakers may
be loud.
Do not place the microphone behind
furniture or too close to the wall. Otherwise,
it can produce an incorrect test result.
User EQ
You can confi gure the equalizer settings manually
to your preference.
Settings
Display
Audio
Network
System
Language
Security
General
Support
User EQ
Reset
>
Adjust
<
Move
'
Return
6
·
·
·
·
·
0
·
·
·
·
·
-6
0
250Hz
0
600Hz
0
1kHz
0
3kHz
0
6kHz
0
10kHz
0
15kHz
A
✎
HT-D5210C_ZA_0307.indd 35HT-D5210C_ZA_0307.indd 35 2011-03-08  12:18:292011-03-08  12:18:29