Samsung HT-D5210C user manual Dynamic Range Control, Digital Output Selection, Bitstream, Pcm

Digital Output Selection

			Bitstream	Bitstream	Bitstream
Setup		PCM		(Re-encoded	(Re-encoded
			(Unprocessed)
				DTS)	Dolby D)
Connection		HDMI supported	HDMI supported	HDMI supported	HDMI supported
		AV receiver	AV receiver	AV receiver	AV receiver
	PCM	Up to 7.1ch	PCM	DTS re-encoded	Re-encoded
					Dolby Digital *
	Dolby Digital	Up to 7.1ch	Dolby Digital	DTS re-encoded	Re-encoded
					Dolby Digital *
	Dolby Digital Plus	Up to 7.1ch	Dolby Digital Plus	DTS re-encoded	Re-encoded
					Dolby Digital *
Audio Stream on	Dolby TrueHD	Up to 7.1ch	Dolby TrueHD	DTS re-encoded	Re-encoded
Blu-ray Disc					Dolby Digital *
	DTS	Up to 6.1ch	DTS	DTS re-encoded	Re-encoded
					Dolby Digital *
	DTS-HD HRA	Up to 7.1ch	DTS-HD HRA	DTS re-encoded	Re-encoded
					Dolby Digital *
	DTS-HD MA	Up to 7.1ch	DTS-HD MA	DTS re-encoded	Re-encoded
					Dolby Digital *
Audio Stream	PCM	PCM 2ch	PCM 2ch	PCM 2ch	PCM 2ch
	Dolby Digital	Up to 5.1ch	Dolby Digital	Dolby Digital	Dolby Digital
on DVD
	DTS	Up to 6.1ch	DTS	DTS	DTS
			Outputs only the	Decodes the main	Decodes the main
		Decodes the main	main feature audio	feature audio and	feature audio and
			stream so that your	BONUSVIEW audio	BONUSVIEW audio
		feature audio and	AV receiver can	stream together	stream together into
		BONUSVIEW audio
Definition for			decode the audio	into PCM audio and	PCM audio and adds
	Any	stream together
Blu-ray Disc			bitstream.	adds Navigation	Navigation Sound
		into PCM audio and
			You will not hear	Sound Effects, then	Effects, then re-
		adds Navigation
			BONUSVIEW	re-encodes the	encodes the PCM
		Sound Effects.
			audio or Navigation	PCM audio into DTS	audio into Dolby digital
			Sound Effects.	bitstream.	bitstream or PCM.

* If the Source Stream is 2ch, “Re-encoded Dolby D” Setting are not applied. Ouput will be LPCM 2ch.

03 Setup

Dynamic Range Control

You can listen at low volumes, but still hear dialog clearly. This is only active if your product detects a Dolby Digital signal.

•Auto : The Dynamic Range Control will be set automatically based on the information provided by the Dolby TrueHD Soundtrack.

•Off : Movie soundtracks are played using the standard Dynamic Range.

•On : When Movie soundtracks are played at low volume or through smaller speakers, the system can apply appropriate compression to make low-level content more intelligible and prevent dramatic passages from getting too loud.

English 37

HT-D5210C_ZA_0307.indd 37 2011-03-08 ￿￿ 12:18:31