Minute Skip function, Subtitle Display, Operation

1p~40p(DS400)-SECA GB 11/10/04 9:14 AM Page 31

5 Minute Skip function

• Go to the screen about 5 minutes after whenever you press	button.
• Go to the screen about 5 minutes earlier whenever you press	button.

•Each time you press the button, your selection will toggle between “SUBTITLE ON” (1/1, 1/2 ...) and “SUBTITLE OFF”.

•If the disc has only one subtitle file, it will be played automatically.

If the disc has more than one subtitle file, the default subtitle may not match the movie and you will have select your subtitle language as follows:

	1	In Stop mode, press the , , , button, select the desired
		In Stop mode, press the , , , button, select the desired
	2	subtitle ( ) from the TV screen, and then press the ENTER button.
	2	When you select the desired DivX file from the TV screen, the

DivX Supported

Avi files are used to contain the audio and video data; these must be stored on CD in the ISO 9660 format.

OPERATION

MPEGs containing DivX can be divided into Video and Audio.

•Video compatibility : All versions of DivX later than 3.11 (including the latest 5.1) are supported. In addition, XviD is supported.

For WMV, V1, V2, V3, and V7 formats are possible.

•Audio compatibility : MP3s encoded at bitrates from 80kbps to 320kbps, AC3s from 128kbps to 448kbps, and WMAs from 56kbps to 160kbps are supported.

•In addition, for subtitles, this unit will support Text format (SMI).

Note	• When playing the DivX disk, you can play the file with extension of AVI only.
	• Among the available DivX audio formats, DTS Audio is not supported.
	• WMV V8 is not supported for WMV files.	28
	• When burning a subtitle file to a CD-ROM with your PC, be sure to burn it as an SMI file.
	• DivX Disc does not playing when its sampling frequency is lower than 32kHz.