Samsung HT-DS400 Operatinga TV with the Remote Control, corresponding to your brand of TV

41P~74P(DS400)-SECA GB 11/10/04 9:16 AM Page 66

Operating a TV with the Remote Control

Note

When operating a TV with the remote control

1	Press the MODE button to make the TV
	indicator on the remote control flash.
	TV DVD RECEIVER
2	Press POWER button to turn on the TV.
3	Point the remote control toward the TV.
4	While holding down POWER, enter the code
	corresponding to your brand of TV.

•If the code matches the TV's code, the TV will be turned off.

•If there is more than one code listed for your TV in the table, enter one at a time to determine which code works.

Example: For a Samsung TV

While holding down POWER, use the number buttons to enter 00, 01, 02, 03, 04, and 05.

Pont the remote control toward the TV and press

5 POWER. If the TV turns off or on, the setting is complete.

•You can use the POWER, TV/VIDEO, VOLUME, CHANNEL, and Numeric buttons (0~9).

• The remote control may not work on some brands of TVs. Also some operations may not be possible depending on your brand of TV.

67	• If you do not set the remote control with the code for your brand of TV, the remote control will
	work on a Samsung TV by default.