Samsung HT-DS400 Settingthe Speaker Mode, In the Speaker, press ENTER button Press Cursor

41P~74P(DS400)-SECA GB 11/10/04 9:16 AM Page 52

Setting the Speaker Mode

Signal outputs and frequency responses from the speakers will be automatically adjusted according to your speaker configuration and whether certain speakers are used or not.

In Stop mode,

1 pressbutton.MENU

In the Speaker

3 Setup, press the ENTER button again.

Press Cursor 2 button to move to ‘Audio’ and then

press ENTER button.

Press Cursor , ,

4 , buttons to move to the desired speaker and then press ENTER button.

•For C, LS, and RS, each time the button is pressed, the mode switches alternately as follows: SMALL ➝ NONE.

•For L and R, the mode is set to SMALL.

SMALL : Select this when using the speakers.

NONE : Select this when no speakers are installed.

Note

•Depending on PRO LOGIC and STEREO, the speaker mode may vary.

53