Samsung HT-E455K/ZN, HT-E455K/SH manual Installing the Speakers on the Tallboy Stand, HT-E445K

HT-E445K

(L)	(R)		SPEAKER CABLE
			SCREW (5×15): 16EA
FRONT		STAND	
(L)	(R)

CENTER

SURROUND STAND BASE SUBWOOFER

HT-E455K

(L) (R) SPEAKER CABLE

HT-E445K

CENTER SPEAKER

FRONT	SURROUND SUBWOOFER
SPEAKER	SPEAKER

HT-E455K

02 Connections

		SCREW (5×15): 16EA				CENTER SPEAKER
FRONT	STAND
(L) (R)
			
		CENTER
SURROUND	STAND BASE	SUBWOOFER		FRONT/SURROUND SPEAKER		SUBWOOFER
Installing the Speakers on the Tallboy Stand
* HT-E453K only - Front Speakers				1		2
* HT-E445K/E455K only - Front/Surround Speakers					Stand Base

1.Turn the Stand Base upside-down and connect it to the Stand.

2.Insert three screws (5*15, For connecting Stand & Stand Base) clockwise into the three holes marked using a screwdriver as shown in the illustration.

!CAUTION : When you use a torque screwdriver, be careful not to put excessive force. Otherwise, it runs idle or can be damaged. (torque screwdriver- below 15 kg.f.cm)

3.Straighten a supplied speaker wire and put in the hole on the center of Stand Base.

4.Connect the upper Speaker to the assembled Stand.

5.Insert another large screw (5*15, For connecting Speaker & Stand) clockwise into the hole on the rear of the speaker using a screwdriver.

6.This is the appearance after the speaker is installed. Follow this steps to install other speaker.

Stand

34

Speaker

Stand

56

English 17