Connections

Attaching the Toroidal Ferrite Core to the Power Cord

If you attach a Toroidal ferrite core to the power cord, it will help to prevent RF interference from radio signals.

I D S E T

<Main Unit><Subwoofer>
1.Pull the fixing tab of the Toroidal ferrite core to open it.2.Make a loop twice in the power cord.

3.Attach the Toroidal ferrite core to the power cord as the figure shows and press it until it clicks.

Connecting the FM Antenna

1 . Connect the FM antenna supplied to the FM ANT Jack.

2 . Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.

NOTE

This product does not receive AM broadcasts.

FM Antenna (supplied)

Installing the Cradle Stand

1 . Put the 3 bumps on the product into the three holes on the cradle stand.

2 . Put the supplied a screw in the product and rotate them clockwise with screw driver.

Screw3 bumps16 English

HT-E8200_XU_0315.indd 16

2012-03-15 오후 1:10:32