Connections
Method 2 Connecting to a TV with a Video Cable - Good Quality
Connect the supplied Video cable from the VIDEO OUT jack on the back of the product to the VIDEO IN jack on your TV.
NOTE
Do not connect the unit through a VCR. Video signals fed through VCRs may be affected by copyright protection systems and the picture will be distorted on the television.
Using Anynet+(HDMI-CEC) (Samsung products only)
Anynet+ is a function that enables you to control other Samsung Devices with your Samsung TV's remote control. Anynet + can be used by connecting this product to a SAMSUNG TV using a HDMI Cable.
NOTE
The Anynet+ function supports some buttons of the remote control. This function is not available if an HDMI cable does not support CEC.
Please check the Anynet+ logo (If your TV has an Anynet+ logo, then it supports Anynet+ function.)
Connecting to External Devices
To select the correct mode for an external device, press the FUNCTION button. Each time you press the button, the mode changes in this order : DVD/CD D.IN BT(OPTION) AUX 1 AUX 2 USB FM
R
Red
Method 1 | (Cable not supplied.) |
W
White
AUDIO OUT
AUX IN 2 | VIDEO |
|
OUT |
| |
|
| |
| FM ANT | HDMI OUT |
OPTICAL
DIGITAL
External Devices
AUDIO IN
DIGITAL OUT
Method 2 (Cable not supplied.)
Method 1 AUX 2 : Connecting an External Analog Component
Connect AUX IN 2 (Audio) on the back of the product to the Audio Out of the external Analog component.
Select the AUX 2 mode.
NOTE
Be sure to match the colors of the connecting jacks.
You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.
If no button actions for more than 8 hours in AUX mode, the power will automatically turn off.
Method 2 OPTICAL : Connecting an External Digital Audio Component
Connect the DIGITAL AUDIO IN (OPTICAL) on the back of the product to the Digital Output of the external digital component. Select the D.IN mode.
If no OPTICAL signal for more than 25 minutes, the product will automatically turn off.
14 English
