Samsung HT-H7750WM/XN manual Wireless Network, Settings Network Settings, ĞĞ Wireless Automatic

✎✎You can get the network parameter values from your Internet provider.

7.When finished entering all the parameter values, select OK, and then press the OK button. The home cinema verifies the network connection and then connects to the network.

Wireless Network

You can set up a wireless network connection in three ways:

-- Wireless Automatic -- Wireless Manual -- WPS(PBC)

Before you configure the wireless network connection, disconnect any wireless network devices currently connected to the product or, if applicable, the product's current wired connection.

ĞĞWireless - Automatic

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 22:

1.In the Network Settings screen, change Network type to Wireless. The product searches for and then displays a list of the available networks.

✎✎You should be able to find the security code or pass phrase on one of the set up screens you used to set up your router or modem.

ĞĞWireless - Manual

If you have a static IP address or the Automatic procedure does not work, you'll need to set the Network Settings values manually.

After following Steps 1 to 3 in "Configuring Your Network Connection" on page 22:

1.	In the Network Settings screen, change
	Network type to Wireless. The product
	searches for and then displays a list of the
	available networks.
2.	Scroll through the list, select the desired
	network or Add Network, and then press the
	OK button.
3.	If you selected a network in Step 2, go to
	Step 6.
	If you selected Add Network, go to Step 4.
4.	Enter your wireless network or wireless
	router's name.
	~~ Enter letters by selecting a letter with the
	78:; buttons, and then pressing the
	OK button.
	~~ To display capital letters (or redisplay lower
	case letters if capital letters are displayed),
	select , and then press the OK button.

Settings

Network Settings

Select your network type.

Network type Wireless

Wireless network

si-ap

iptime

KIMING_VTOWER

You can connect your Blu- ray player to the internet. Please select which wireless network to use.

~~ To display symbols and punctuation, select

123#&, and then press the OK button. To

redisplay letters, select 123#&, and then

press the OK button.

When finished, select Done, and then press

the OK button.

5. On the Security type screen that appears,

use the ,. buttons to select the network's

Security type, and then press the OK button.

Refresh WPS(PBC)

2.Select the desired network, and then press the OK button.

3.On the Security screen, enter your network's security code or pass phrase.

Enter letters by selecting a letter with 78:; buttons, and then pressing OK button.

4.When finished, select Done, and then press the OK button. The product verifies the network connection and then connects to the network.

On the next screen, enter your network's

security code or pass phrase.

~~ Enter letters by selecting a letter with the

78:; buttons, and then pressing the

OK button.

When finished, select Done, and then press

the OK button. The product searches for the

network.

6. The Network connection fail screen appears.

Use:; buttons to select IP Settings, and

then press the OK button.

23 - English