Samsung HT-H7500WM/XN manual ~ ~ Is the TV power on?, To their default values, Is no sound, Screen

Appendix

Symptom	Check/Remedy
The remote control does	~~ Are you operating the remote within its operational range and within the
not work.	proper angle relative to the sensor?
	~~ Are the batteries drained?
~~ The disc is rotating but	~~ Is the TV power on?
there is no picture.	~~ Are the video cables connected properly?
~~ Picture quality is poor	~~ Is the disc dirty or damaged?
and the picture is	~~ A poorly manufactured disc may not be playable.
shaking.
Audio language and	~~ The Audio Language and subtitle functions will not work if the disc does not
subtitles do not work.	contain them.
The menu screen does not	~~ Are you using a disc that does not contain menus?
appear even when you
select the menu function.

The aspect ratio cannot be changed.

~~ You can play 16:9 Blu-ray/DVD discs in 16:9 Full mode, 4:3 Letter Box mode, or 4:3 Pan-Scan mode, but 4:3 Blu-ray/DVD discs are played in 4:3 mode only. Refer to the Blu-ray Disc jacket, and then select the appropriate function.

~~ The product is not	~~ Press and hold the remote control's e(EXIT) button for 5 seconds in
working.	STANDBY mode. This will reset the unit.
(Example: The power	-- Using the RESET function will erase all stored settings.
goes off or you hear a
	Do not use this function unless necessary.
strange noise.)
~~ The Product is not
working normally.
You have forgotten the	~~ With no disc in the product, press and hold the product's @ button for
rating level password.	longer than 5 seconds. INIT appears on the display and all settings will return
	to their default values.
	-- Using the RESET function will erase all stored settings.
	Do not use this function unless necessary.
Can't receive radio	~~ Is the antenna connected properly?
broadcasts.	~~ If the antenna's input signal is weak, install an external FM antenna in an
	area with good reception.

While listening to TV audio ~~ If you press the OPEN/CLOSE ^ button while listening to TV audio using the

through the product, there	D. IN or AUX functions, the Blu-ray/DVD disc functions are turned on and
is no sound.	the TV audio is muted.
"Not Available" appears on ~~ The features or action cannot be completed at this time because:
screen.	1.	The Blu-ray/DVD disc's software restricts it.
	2.	The Blu-ray/DVD disc's software doesn’t support the feature (e.g., angles)
	3.	The feature is not available at the moment.
	4.	You’ve requested a title or chapter number or search time that is out of
		range.

If the HDMI output is set to a resolution your TV cannot support (for example, 1080p), you may not see a picture on your TV.

~~ Press and hold the @ button on front panel for more than 5 seconds with no disc in the product. All settings will revert to their factory settings.

60 - English