Samsung HT-J4550/EN, HT-J4530/EN, HT-J4500/EN manual Using Bluetooth, Recording FM Radio

About characters shown in the display

When the display shows PS,or RT signals,the following characters are used.

•The display window cannot differentiate upper case and lower case letters and always uses upper case letters.

•The display window cannot show accented letters, <A,> for instance, may stands for accented <A’s> like <À, Â, Ä, Á, Å and Ã.>

PTY (Program Type) indication and PTY-SEARCH function

One of the advantages of the RDS service is that you can locate a particular kind of program from the preset channels by specifying the PTY codes.

To search for a program using the PTY codes

3. Press the RED (A) button to start recording. The recording process is started.

• The recorded time is displayed in the left and the recording time still available according to free space in the USB storage device is displayed in the right.

4. Press the EXIT button to finish your recording. The recording is stopped and saved as a .mp3 file at the same time. To play the recorded file, refer to "Playing Files on a USB Device".

✎✎The recorded file is saved in Tuner folder which was created automatically.

✎✎Only some buttons are operable while FM radio is being recorded. (You can enable only (OPEN/ CLOSE) button, (POWER) button, EXIT button, MUTE button, and VOLUME +, - button.)

✎✎If you don't press any button while recording, screen saver will be enabled.

„„	Before you start!			✎✎No sound effect such as DSP, EQ, etc. is
•	The PTY Search is only applicable to preset stations.			recorded.
				✎✎The radio is recorded at the specified volume
•	To stop searching any time during the process, press
	5 button while searching.			even if you change the volume or press the Mute
•	There is a time limit in doing the following steps.			button during the recording process.
	If the setting is cancelled before you finish, start from			✎✎If you remove the USB device or Power Cable
•	step 1 again.			during the recording process, the recorded file,
	When pressing the buttons on the primary remote			which has been recorded until then, may not
	control, make sure that you have selected the FM			work.
1.	station using the primary remote control.			✎✎The recording will not start if the remaining free
	Press the PTY SEARCH button while listening to an			space of the USB storage is less than 2MB.
	FM station.			✎✎If the USB device is removed or has insufficient
	RDS DISPLAY		TA	space (under 2MB), the corresponding message
				is displayed and recording will stop.
	1	2	3
	PTY -	PTY SEARCH	PTY +	Using Bluetooth
	4	5	6
				You can use a Bluetooth device to enjoy music with
2.				high quality stereo sound, all without wires!
	Press the PTY- or PTY+ button until the PTY code
				• Pairing distance : max. 2 meters, Operating
	you want appears on the display.
	• The display gives you the PTY codes described			distance: max. 10 meters.
3.	to the right.			• Actual Bluetooth performance may differ
	Press the PTY SEARCH button again, while the
				depending on your environment, even if you
	PTY code selected in the previous step is still on the
				use your Bluetooth device within the specified
	display.			operating distance.
	• The centre unit searches 15 preset FM stations,
				What is Bluetooth?
	stops when it finds the one you have selected,
	and tunes in that station.
Recording FM Radio				Bluetooth is a technology that enables Bluetooth-
				compliant devices to interconnect with each other
				easily using a short, wireless connection.
You can record your favorite radio broadcast on the				• A Bluetooth device may hum or malfunction:
inserted USB storage device.
				-- When a part of your body is in contact with the
1.	Insert a USB device into the USB jack on the			receiving/transmitting system of the Bluetooth
	front of the product.			device or the Home Cinema.
2. Go to the FM mode to turn on your desired				-- When it is subject to electrical variation from
				obstructions caused by a wall, corner, or office
	radio broadcast.			partitioning.

27 - English

Playing Content