Samsung HT-J7500W/XE, HT-J7750W/EN Radio Setup, Selecting Mono or Stereo, Presetting Stations

Settings

Radio Setup

~To listen to the radio, you must connect the supplied FM antenna.

Operating the Radio with the Remote Control

1.Press the SOURCE button to select FM.

2.Tune to the desired station.

~Preset Tuning 1 : Press the PRESET button to select PRESET, and then press the 78 buttons to select a preset station.

-Before you can tune to preset stations, you must add preset stations to the product's memory.

~Manual Tuning : Press the PRESET button to select MANUAL, and then press the 78 buttons to tune to a lower or higher frequency.

~Automatic Tuning : Press the PRESET button to select MANUAL, and then press and hold the 78 buttons to automatically search the band.

Selecting Mono or Stereo

Press the ST/MO button.

~Each time you press the button, the sound switches between STEREO and MONO.

~In a poor reception area, select MONO for a clear, interference-free broadcast.

Presetting Stations

Example : Presetting FM 89.10 into memory.

1.Press the SOURCE button to select FM.

2.Press the 78 buttons to select <89.10>.

3.Press the MEMORY button.

~NUMBER flashes on the display.

4.Press the MEMORY button again.

~Press the MEMORY button before NUMBER disappears from the display on its own.

~After you press the MEMORY button, NUMBER disappears from the display and the station is stored in memory.

5.To preset another station, repeat steps 2 to 4.

~To tune to a preset station, press the PRESET button to select PRESET, and then press the 78 buttons to select the preset station.

Recording FM Radio

You can record your favorite radio broadcast on a inserted USB storage device.

1.Insert a USB device into the USB jack on the front of the product.

2.Press the SOURCE button to select FM, and then then press the 78 buttons to select the station you want to record.

3.Press the A (Red) button to start recording the radio broadcast. Recording begins.

~The recorded time is displayed on the left and the recording time still available, based on the amount of free space in the USB storage device, is displayed on the right.

4.Press the e(EXIT) button to finish your recording. The recording is stopped and saved as an .mp3 file at the same time. To play the recorded file, refer to "Playing Files on a Storage Device".

✎The recorded file is saved in the Tuner folder which is created automatically.

✎Only the(OPEN/CLOSE),(POWER),

e(EXIT), (MUTE), and VOL +/-, buttons are operable while FM radio is being recorded.

✎If you don't press any buttons while recording, the screen saver will be enabled.

✎Sound effects, such as DSP, EQ, etc., are not recorded during FM radio recording.

✎The radio is recorded at a set, default volume even if you change the volume or press the

(MUTE) button during the recording process.

✎If you remove the USB device or Power Cable during the recording process, the portion of the file which has already been recorded may not play back.

✎Recording will not start if the remaining free space in the USB storage device is less than 2MB.

✎If the USB device is removed or has insufficient space (under 2MB), the appropriate message is displayed and the recording stops.

22 - English