Setting the Speaker Mode
Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.
GB
In Stop mode,
1 pressbutton.MENU
MOVE | ENTER | EXIT |
In the Speaker
3 Setup, press the ENTER button
Press Cursor 
2 button to move to ‘Audio’ and then
press ENTER button.
MOVE | ENTER | EXIT |
Press Cursor 
, 
,
4
,
buttons to move to the desired speaker and then press ENTER button.
•For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows: SMALL ➝ NONE.
•For L and R, the mode is set to SMALL.
SETUP
MOVE | ENTER | RETURN | EXIT | CHANGE | RETURN | EXIT |
|
|
| MOVE |
SMALL : Select this when using the speakers.
NONE : Select this when no speakers are connected.
Note |
•Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page
50
