Samsung HT-Q9R/ELS manual Setting the Test Tone

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.

Setting the DRC (Dynamic Range Compression)

This feature balances the range between the loudest and quietist sounds.

You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.

GB

In Stop or no

1 disc mode, press MENU button.

MOVE ENTER EXIT

2	Press Cursor	but-	3	Press Cursor	button
	ton to move to ‘Audio’			to move to ‘TEST
	and then press			TONE’ and then press
	ENTER button.			ENTER button.
			• The test tone will be sent to L ➝ C ➝
			R ➝ SR ➝ SL ➝ SW in order.
			If the ENTER button is pressed again
			at this time, the test tone will stop.
	MOVE ENTER	EXIT
				MOVE ENTER RETURN	EXIT

In Stop or no disc		Press Cursor
		button to move to
1 mode, press	2
		‘Audio’ and then
MENU button.		press ENTER

button.

MOVE ENTER EXIT MOVE ENTER EXIT

Press RETURN button to return to the previous level.

STOPEXIT

Press MENU button to exit the setup screen.

Alternate method: press the TEST TONE button on the remote.

Press Cursor 3 button to move to

‘DRC’ and then press ENTER

button.

4 Press Cursor

, to adjust the ‘DRC’.

•When the Cursor button is pressed, the effect is greater, and when the

Cursor button is pressed, the effect is smaller.

SETUP

Press TEST TONE button.	L: Front Speaker (L)	C: Center Speaker	SW: Subwoofer
• Test tone will be produced as follows:	R: Front Speaker (R)	SL: Rear Speaker (L)	SR: Rear Speaker (R)
When playing a DVD or CD, this will work only in Stop mode.	Multi-Channel Pro Logic Mode
• Use this function to check that each speaker is correctly con-
nected and that there is no problem.
To end the test tone,		Start

press TEST TONE button again.

MOVE ENTER RETURN EXIT CHANGE RETURN EXIT

Press RETURN button to return to the previous level.

Press MENU button to exit the setup screen.

47 48