Connecting the Speakers (Con’t)

HT-TKX25

Center Speaker

Front Speaker (R)

Front Speaker (L)

 

Rear Speaker (R)

Rear Speaker (L)

 

Subwoofer

Connecting the Speakers (HT-TKX22/HT-TKX25 only)

1

2

 

1

Press down the terminal tab on the back of the speaker.

 

Black

Red

2

Insert the black wire into the black terminal (–) and the red

 

 

 

 

wire into the red (+) terminal, and then release the tab.

 

 

 

3

Connect the connecting plugs to the back of the Home

 

 

 

 

Theater.

Make sure the colors of the speaker terminals match the colors of the connecting plugs.

•Do not let children play with or near the speakers. They could get hurt if a speaker falls.

•When connecting the speaker wires to the speakers, make sure that the polarity (+/–) is correct.

•Keep the subwoofer speaker out of reach of children so as to prevent children from inserting their hands or alien substances into the duct (hole) of the subwoofer speaker.

•Do not hang the subwoofer on the wall through the duct (hole).

• If you place a speaker near your TV set, screen color may be distorted because of the magnetic field generated by the speaker. If this occurs, place the speaker away from your TV set.

Speaker Installation

GB

 

With the HT-TKX22 front speakers and HT-TKX25 front/rear speakers, you have the option of installing the speakers on Stands, or directly to the Stand Base.

Speaker Components (HT-TKX22/HT-TKX25 only)

SPEAKER

STAND

STAND BASE

Screw (A)

Screw (B)

CONNECTIONS

How to Install the Speaker on the Stand

 

 

 

 

 

1

2

1

Turn the STAND upside-down and connect it to the

 

 

 

 

 

 

 

STAND BASE.

 

 

 

 

 

2

Insert two screws (A) into the two holes marked with

 

 

 

 

arrows using a screwdriver as shown in the illustration.

 

 

 

3

Insert a screw (B), into the hole on the rear of the Speaker

 

3

4

 

STAND.

 

 

 

 

 

4

Connect the assembled stand to the SPEAKER.

 

 

 

5

Insert another screw (B) into the hole on the rear of the

 

 

 

 

speaker using a screwdriver as shown in the illustration.

 

 

 

6

This is the SPEAKER successfully assembled with the

 

5

6

 

Stand.

 

 

 

• Make sure that the speaker is installed on a flat and stable area. Otherwise it may be easily knocked over.

How to Install the Speaker on the Stand Base

1

2

1 Connect the SPEAKER with the STAND BASE.

 

 

 

 

2

Insert the screw (B) into the hole on the rear of the speaker

 

 

 

using a screwdriver as shown in the illustration.

 

 

3

This is the SPEAKER successfully assembled with the

 

 

 

Stand Base.

3

 

 

 

14

15