Connecting Audio from External Components
Optical Cable | Audio Cable (not supplied) | |
If the external analog component has | ||
(not supplied) | ||
only one Audio Out, connect either | ||
| ||
| left or right. |
Connecting an External Digital Component
Digital signal components such as a
1 Connect the Digital Input (OPTICAL 1 or 2) on the Home Theater to the Digital Output of the external digital component.
2 Press the AUX button on the remote control to select <D.IN1> <D.IN2> input.
■You can also use the FUNCTION button on the main unit.
The mode switches as follows : <DVD> ➝ <USB> ➝ <HDMI> ➝ <D.IN 1> ➝ <D.IN 2> ➝ <AUX> ➝ <FM>.
Connecting an External Analog Component
Analog signal components such as a VCR.
1 Connect the AUX (Audio) In on the subwoofer to the Audio Out of the external analog component.
■Be sure to match connector colors.
2 Press the AUX button on the remote control to select <AUX> input.
■You can also use the FUNCTION button on the main unit.
The mode switches as follows : <DVD> ➝ <USB> ➝ <HDMI> ➝ <D.IN 1> ➝ <D.IN 2> ➝ <AUX> ➝ <FM>.
• To listen to the audio from the TV in 5.1 channel through the Home Theater, press the Dolby Pro Logic II or the SUPER 5.1 button.
•You can connect the Video Output jack of your VCR to the TV, and connect the Audio Output jacks of the VCR to this product.
Connecting the FM Antenna
FM Antenna (supplied)
1 Connect the FM antenna supplied to the FM 75Ω COAXIAL Jack.
2 Slowly move the antenna wire around until you find a location where reception is good, then fasten it to a wall or other rigid surface.
• This unit does not receive AM broadcasts.
Cooling Fan
The cooling fan supplies cool air to the subwoofer to prevent overheating.
Please observe the following cautions for your safety.
■ Make sure the unit is
■ Do not obstruct the cooling fan or ventilation holes. (If the cooling fan or ventilation holes are covered with a newspaper or cloth, heat may build up inside the unit and fire may result.)
ENG
CONNECTIONS
22 | 23 |
