Samsung HT-TXQ120 Setting the Delay Time, Setting the Test Tone, Setting Center Speaker

Settings (Con’t)

Setting the Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers.

	1	In Stop mode, press the MENU button.
	2	Press the Cursor	button to move to <Audio> and then press the ENTER button.
	3	Press the Cursor	button to move to <DELAY TIME> and then press the
		ENTER button.
MOVE ENTER RETURN EXIT	4
		Press the Cursor	, , , button to move to the desired speaker and then
		press the ENTER button.
5		Press the Cursor	, button to set the Delay time.

You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC.

Press the RETURN button to return to the previous level.

MOVE ENTER RETURN EXIT

Press the MENU button to exit the setup screen.

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.

Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the sound of the Center and Surround Speakers.

ENG

Setting the Test Tone

Use the Test Tone feature to check the speaker connections.

1 In Stop mode, press the MENU button.

2 Press the Cursor button to move to <Audio> and then press the ENTER button.

3 Press the Cursor button to move to <TEST TONE> and then press the

MOVE ENTER RETURN EXIT	ENTER button.
		The test tone will be sent to L ➝ C ➝ R ➝ SR ➝ SL ➝ SW in order.
		If the ENTER button is pressed again at this time, the test tone will stop.

Press the RETURN button to return to the previous level.

Press the MENU button to exit the setup screen.

ENTEREXIT

Ideal CENTER SPEAKER

placement

Ideal

SURROUND SPEAKER placement

It is desirable to place all speakers within this circle.

Df: The distance from FRONT SPEAKER

Dc: The distance from CENTER SPEAKER

Ds: The distance from SURROUND SPEAKER

Setting CENTER SPEAKER

If the distance of Dc is equal to or longer than the distance of Df in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance between Df and Dc	0 inch	13.6 inches	27.2 inches	40.8inches	4.5 feet	5.6feet
Delay Time	0 ms	1 ms	2 ms	3 ms	4 ms	5 ms

Setting REAR (SURROUND) SPEAKERS

If the distance of Df is equal to the distance of Ds in the figure, set the mode as 0ms. Otherwise, change the setting according to the table.

Distance between Df and Dc	0 inch	40.8 inches	6.7 feet	10.0 feet	13.4 feet	16.7 feet
Delay Time	0 ms	3 ms	6 ms	9 ms	12 ms	15 ms

• With (Dolby Pro Logic II), the delay time may be different for each mode.

•With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.

•The Center channel is only adjustable on 5.1 channel discs.

SETUP

50 51