Samsung HT-TXQ120 Speaker Installation, Installing the DVD player, Stand Packages, Base

Tighten 2 screws at the bottom of the back cover.

• Make sure that the speaker is installed on a flat and stable area. Otherwise it may be easily knocked over.

Push the cable into the cable fixing hole in the stand.

Loosen 2 screws at the bottom of the back cover. Detach the back cover by lifting it up.

Secure the main unit by aligning 4 protruding points on the back of the main unit with the fixing holes on the stand.

Tighten 2 screws in the middle of the stand.

Speaker Installation

How to Install the Speaker and the Stand

1	2	1 Turn the stand upside down and mount it on the stand
STAND
BASE		base.

	Installing the DVD player		ENG
1	STAND	1 Mount the stand on the stand base and tighten 4

screws on the bottom side of the stand base.

STAND BASE 2

3

4

	STAND	2	Tighten 4 screws on the bottom side of the stand base.
		3	Place the stand on the floor and tighten 2 screws on the
3	4		back of the stand.
	SPEAKER	4
			Mount the speaker on the stand.
	STAND	5 Tighten 2 screws on the back of the speaker.
		6	This is the successfully assembled speaker.
5	6

Speaker Packages

Please confirm that all the following contents are included in the package.

Speaker Accessories

Center Speaker

23

45

STAND

6 7 8

Toroidal	System connection
Ferrite Core	cable - main unit
9	10

BACK COVER 5

6 Open a Toroidal Ferrite Core by pulling it upward. Wrap it around of the system connection cable so it will be next to the DVD Player. Close it back by pressing it all the way down until you hear a clicking sound.

7

8 To fix the cable, insert the cable holder into the hole on the stand.

9 Let the cable run through the hole at the bottom of the back cover and close the back cover.

10

11 Open a Toroidal Ferrite Core by pulling it upward. Wrap it around of the system connection cable so it will be next to the DVD Player. Close it back by pressing it all the way down until you hear a clicking sound.

•The Toroidal Ferrite Core is designed to reduce electromag- netic waves that may cause interference.

CONNECTIONS

STAND BASE

SPEAKER STAND Screw Screw

BACK COVER

Stand Packages

Please confirm that all the following contents are included in the package.

Front/Rear Speaker (4EA) Subwoofer Speaker Speaker Cable (5EA)

*Front speakers and rear speakers are packaged separately as shown in the diagram.

11

BACK COVER

STAND

STAND BASE

Screw (6EA)

12

System connection cable - Main Unit to Subwoofer

Cable Holder (3EA)

13