Setup
Setting up the Speaker Delay Time
Settings
When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker is the same.
Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can adjust this difference by adding a delay effect to the Center and Surround Speakers.
✎NOTE
Delay Time
Front |
|
|
Center | : | 00ms |
Surround | : 00ms | |
Subwoofer |
|
|
Test Tone | : | Off |
<Change " Select ' Return mMove " Select ' Return
You can not set Center and Surround in this mode when their Speaker Size is set to NONE.
Test Tone
Use the Test Tone feature to check the speaker connections.
•Press the ◄► buttons to select On.
•The test tone will be sent to Front Left ➞ Center ➞ Front Right ➞ Surround Right ➞ Surround Left ➞ Subwoofer in order.
To stop the test tone, press the ENTER button.
Settings
Speaker Setting
Speaker Size |
|
|
Sound Edit |
|
|
Delay Time |
|
|
Test Tone | : On | ► |
DRC (Dynamic Range Compression)
"Select ' Return
mMove " Select ' Return
This feature balances the range between the loudest and
quietest sounds. You can use this function to enjoy Dolby Digital sound when watching movies at low volume at night.
•You can select either Full, 6/8, 4/8, 2/8, off.
Audio Sync
Video and audio sync may not match with digital TV. If this occurs, adjust the audio delay time to match the video
•You can set the audio delay time between 0 ms and 300 ms. Set it to the optimal status.
Speaker Selection
The audio signals transmitted over the HDMI Cable can be toggled On/Off.
•Video is transmitted over the HDMI connection cable only, and audio is output through the product speakers only.
Select the Home Theater.
•Both video and audio signals are transmitted over the HDMI connection cable, and audio is output through your TV speakers only.
Select the TV Speaker.
✎NOTE
The default setting of this function is Home Theater .
HDMI Audio is automatically
