Samsung HW-H500/EN manual TV Soundconnect, ++Connecting a TV to the SoundStand

FUNCTIONS

TV SOUNDCONNECT

You can enjoy TV sound through your SoundStand when it is connected to a Samsung TV that supports the TV SoundConnect function.

++Connecting a TV to the SoundStand

Connect

1.Turn on the TV and SoundStand.

•Set the "Add New Device" menu selection of the TV to "On".

2.Press the ( ) button on the main unit’s top panel or the Soundconnect button on the remote control to select the TV mode.

•The LED will blink indicating that TV is not connected yet.

3.On the TV, a message asking whether to enable the TV SoundConnect function appears. "[Samsung] SoundStand" is displayed on the TV screen.

4.Select <Yes> using the TV remote to finish connecting the TV and SoundStand.

•The LED will stop blinking when TV is successfully connected.

●● Switching the SoundStand’s mode from TV to another automatically terminates TV SoundConnect.

●● To connect the SoundStand to another TV, the existing connection must be terminated.

●● Terminate the connection to the existing TV, then press the Soundconnect button on the remote control for 5 seconds to connect to another TV.

●● The TV SoundConnect (SoundShare) function is supported by some Samsung TVs released from 2012 on. Check whether your TV supports the TV SoundConnect (Soundshare) function before you begin. (For further information, refer to the TV’s user manual.)

●● If your Samsung TV was released before 2014, check the SoundShare setting menu.

●● If the distance between the TV and SoundStand exceeds 5m, the connection may not be stable or the audio may stutter. If this occurs, relocate the TV or SoundStand so that they are within operational range, and then re-establish the TV SoundConnect connection.

●● TV SoundConnect Operational Range

--Recommended pairing range: within 50cm.

--Recommended operational range: within 5m.

++Using the Bluetooth POWER On function with TV SoundConnect.

The Bluetooth POWER On function is available after you have successfully connected the SoundStand to a Bluetooth compatible TV using TV SoundConnect. When the Bluetooth POWER On function is ON, turning the connected TV on or off will turn the SoundStand's power on and off as well.

1.Connect the TV with your SoundStand using the TV SoundConnect function.

2.Press the Bluetooth POWER button on the SoundStand remote. The GREEN , and LEDs appear on the SoundStand's display.

•GREEN : The SoundStand turns on or off when you turn the TV on or off.

•RED : The SoundStand turns off when you turn the TV off.

●● This function is supported only by some Samsung TVs released from 2013 on.

●● If the SoundStand is connected to a TV through TV SoundConnect, and you turn the SoundStand off by turning off the TV, the Bluetooth Power function will not turn the SoundStand on, even if you connect another Bluetooth device to it.

16