MULTIROOM LINK

Adding a HUB

 

 

An Soundbar and a HUB may not pair successfullly if the

 

Soundbar and HUB are too far apart or are on different floors.

 

In such cases, you can link two HUB's together by setting the

 

second HUB to Repeater mode. The additional HUB amplifies

 

the signal and lets you pair the Soundbar to the closest HUB.

 

1.

Set the HUB that is connected to the wireless router to

Soundbar

 

Pairing mode by pressing its SPK ADD button for 1 second.

 

2.

Plug in the new HUB you are using as an extender, and

 

 

then press its SPK ADD button for 10 seconds.

Used as a

3.

extender

The newly added HUB’s LED indicators turn off and on,

 

 

and it switches to Repeater mode.

 

 

4.

Once the connection between the two HUB’s has been

 

 

established, the added HUB’s (

) indicator stops

HUB

 

blinking.

 

 

●● If your smart device is not connected to the wireless router with a Wi-Fi connection, the Soundbar will not appear on the Samsung Multiroom app.

●● Place the HUB that is in Repeater mode in an appropriate location between the Soundbar and the HUB that is connected to the wireless router.

●● You can set only one HUB to Repeater mode.

●● HUB may not be commercially available depending on country or region. To purchase, contact the distributor or Samsung Service Centre.

Relocating the Soundbar

When relocating your Soundbar, refer to the below table.

ENG

Wireless routerHUBWithout a HUBWith a HUB
If you want to connect your Soundbar to the current wireless router.

Turn off the Soundbar, relocate it and then turn it on.

39

If you want to connect yourSoundbar to a differentwireless router.

Turn off the Soundbar, relocate it, then establish the new connection as described in the installation instructions on page 32~38.

Connect a LAN cable between the HUB and the new wireless router, turn on the HUB, and follow "Adding an extra Soundbar to a HUB that is connected to an Soundbar" (page 35) step.