Connecting to a Video Monitor or Projector
Use an S video cable or BNC video cable to connect the
•••Ê Note •••
•The S video and BNC video cables mentioned here are sold separately. Obtain a cable long enough to reach between the devices at the site in which they will be used.
•Standard television sets may be used as video monitors if they are equipped with a video in jack.
S Video Cable
1.
Ensure that the main unit and other devices are turned off.
2.
Insert the plug on one end of the S video cable into the S video output port on the main unit.
VIDEO | S VIDEO |
OUTPUT |
|
Rear Panel of the Main Unit
VIDEO | S VIDEO | |
EXT |
| AC INLET |
IN 1 |
|
|
| USB |
| 60/100 |
EXT | HandShake |
Reserved | |
IN 2 | Service Mode |
| OFF ON |
Video Monitor or Projector
S Video Cable
3.
Insert the plug on the other end of the S video cable into the S video input port on the video monitor or projector.
90