Canon DZ3600u manual To Turn Front Lights Backlight On/Off, Press the Lights button

Using the Front Lights and	Mode
	Preview
Backlight

This command turns the front lights and backlight on and off.

Turn the front lights on when using the DZ-3600U in dark settings. Use the backlight to illuminate films and transparencies, such as OHP transparencies.

!!! Important !!!

• The fluorescent tubes in the front lights become very hot when operated. To avoid burns, please be extremely careful not to touch the tubes directly with your fingers or other body parts.

•The lights take two or three seconds to light up after the power is applied in order to protect their mechanisms. Please do not press the button again because they have not come on right after the button was first pressed.

•Light escaping directly from the backlight will strike the camera lens and adversely affect image quality. To reduce this, zoom in on the film as much as possible to exclude unwanted light.

•••Note •••

•To view negative film, turn on the backlight with the procedures described here and then follow the steps described in Shooting Negatives (P.79).

Procedure with the Remote Control

3

An Introduction

CAPTURE RESOLUTION PREVIEW

W	ZOOM
	T	LIGHTS

–BRIGHTNESS+COLOR

FOCUS

AUTO NEAR FAR

APPREVFWD

To Turn the

Front Lights and

Backlight On/Off

Press the [Lights] button.

•The sequence progresses from lights off, to front lights on, and backlight on with each press of the button.

to the Features

77