Changing the Remote Control Batteries

Follow the procedures below to install or replace the batteries in the remote control.

1.

Open the battery cover by pressing down and sliding the back panel of the remote control that is marked [Open].

2.

If there are spent batteries inside the battery chamber, remove them.

3.

Insert two AA batteries, orienting the battery terminals (“+” and “-” end) in the direction shown on the diagram in the battery chamber. Do not insert the batteries incorrectly.

• Insert the negative (-) end of the battery into the battery chamber first.

4.

Slide the battery cover up from the bottom until it closes with a click.

!!! Important !!!

Do not use rechargeable batteries. (The shape and performance charac- teristics may not operate the remote control correctly.)

Do not mix new and spent batteries together.

Remove the batteries if the unit will not be used for a long period. Remove any battery fluids that leak and replace the leaking cells.

Appendix

109

Remote Control

Page 108
Image 108
Canon DZ3600u manual Changing the Remote Control Batteries, 109