Canon DZ3600u manual Assembly, Gently remove the cover from the main unit if it is on

Assembly

This chapter explains the most fundamental and important operating proce- dures step by step. We encourage you to try each step as you read about it.

!!! Important !!!

•This chapter assumes that you have correctly set up the DZ-3600U for use with a computer and installed Presentation Software. If you have not yet done this, follow the instructions in Chapter 1, Setup for Opera- tion with a Computer, before resuming the steps below.

•Do not place the equipment on an unsteady table or object subject to vibration. Movement of the camera head or filmed object and changes in lighting may corrupt the image capture.

•Skip this and the following page if the three arms (two front lights and one camera arm) have already been erected. Start from Turning On the Power (P.28).

1.

Gently remove the cover from the main unit if it is on.

2.

Facing the front of the main unit, lift up the right front light.

3.

Lift up the left front light.

26