BACK - Advanced Settings - Main Page | NEXT - Advanced Settings - Virtual Server |
Advanced Settings - Wireless
This section will allow you to configure your SMC2404WBR for use with WEP (Wired Equivalent Privacy) security.
Figure 1.0
❍To configure the Wireless Barricade Turbo as a wireless access point for wireless clients (either stationary or roaming), all you need to do is define the radio channel, the Service Set ID (SSID), and encryption options. On the main page, you can also disable the wireless function altogether.
❍You need to open up your web browser and go to http://192.168.2.1, log into the router and go into the Advanced Setup. Click on the "Wireless" link on the left in order to configure the wireless settings. Please make sure that the Wireless functions are enabled before proceeding. You should specify a common radio channel and service domain (i.e., Service Set ID) to be used by the Wireless Barricade Turbo and all of your wireless clients. Be sure you configure all of your clients to the same values. By default, the Wireless Channel is set to "6" and the SSID is "default". The WEP is also disabled.
