port. This will indicate that the connection is firmly attached. Then look at the front of your router, and you will see a WAN LED. If this light is lit, it will indicate that you have a connection coming from your modem. This is vital to successfully establishing an internet connection through the router.

Troubleshooting Tip 1: If this light does not come on, you should check if your cables are firmly inserted. Also try switching cables as well. If the light still does not appear, try using a crossover RJ45 cable.

Step 3: You can plug from ports 1, 2, 3 or 4 into your network card. Double- check to be sure that the RJ45 connection coming from that particular port is firmly inserted into your network card. Once this connection is locked in, you will see a link light on the router indicating that there is a connection between your computer and router.

Troubleshooting Tip 2: If you do not see a link light, make sure that the connection coming from your computer is not loose. Try switching the cables as well.

Troubleshooting Tip 3: Try using a different port on the router if you continue to have problems getting a link light on the first port you have tried. Also check your operating system and verify that your network card is working properly. You can check this through the Device Manager.

Step 4: Now that the link lights indicate all connections are valid, you are ready to begin configuring your PC.

Page 9
Image 9
SMC Networks SMC2404WBR manual