NEXT – Computer Configuration - Configuring your
BACK – Router - Static IP Connection
PC
Connecting To Your SMC2404WBR 11/22 Mbps Wireless Broadband
Router
There are 3 major segments that you will connect together: Modem to Router to Computer.
Figure 1.0 The picture above illustrates the hardware needed to set up your network. (Shown above from left to right is the SM8002CM and SMC2404WBR. The picture of the monitor symbolizes the connection coming from your router to your computer.)
Step 1: You must connect your computer to the router using the RJ45 cable that came with the router. Then connect the modem to the WAN port of the router using the cable that came with your modem. Make sure that the BNC connection to the cable modem is secure at all times. Plug the appropriate power adapter into the router.
Step 2: Double-check to be sure that the RJ45 connection coming from the modem connects to the WAN port at the back of the router. Once the RJ45 connector is plugged into the WAN port, you should hear it click into the RJ45
