Figure 1.1
❍Once you have established a wireless connection to the router, you can configure WEP encryption if you are transmitting sensitive data via the wireless network.
❍The standard 64bit/128bit/256bit encryption requires you to use the same set of encryption/decryption keys for the Wireless Barricade Turbo and all of your wireless clients.
❍You must have a 10-digit key for 64bit WEP, a 26-digit key for 128bit WEP and a 58-digit key for 256bit WEP.
❍To manually configure the keys, enter 5 hexadecimal pairs for your chosen 64-bit key, enter 13 pairs for the 128bit key or enter 29 pairs for the 256bit key. (A hexadecimal digit is a number or letter in the range 0-9 or A- F) Also note that the fields are filled in by default. You need to delete these characters/asterisks before entering your WEP key (For example: To configure WEP using Key 1, first delete the character entries you see for Key 1, then enter your desired hex pairs. Do not delete any asterisks from the other Keys)
