CONNECTIONS

CONNECTIONS

CONNECTING THE SUBWOOFER AND SURROUND SPEAKERS

Do not connect the power cord of this product or your TV to a wall outlet until all connections between components are complete.

Before moving or installing this product, be sure to turn off the power and disconnect the power cord. ●If the main unit is powered off, the wireless subwoofer and surround speaker will go into stand-by mode

and the STANDBY LED on the rear will be Red after blinking Blue several times.

If you use a device that uses the same frequency (2.4GHz) as the Soundbar near the Soundbar, interference may cause some sound interruption.

The maximum transmission distance of the wireless signal of the main unit is about 10 meters, but may vary depending on your operating environment. If a steel-concrete or metallic wall is between the main unit and the wireless subwoofer or surround speaker, the system may not operate at all, because the wireless signal cannot penetrate metal.

Wireless receiving antennas are built into the wireless subwoofer and surround speakers. Keep the units away from water and moisture.

For optimal listening performance, make sure that the area around the wireless subwoofer and surround speakers location is clear of any obstructions.

ENG

Recommended Speaker Layout

TV

Soundbar Main Unit

Subwoofer

90°

90°

110°

110°

Surround Speaker L

Surround Speaker R

19

Page 19
Image 19
Samsung HW-K950/ZF Connecting the Subwoofer and Surround Speakers, Recommended Speaker Layout, 110, Surround Speaker R