Samsung HW-K950/ZF, HW-K950/EN manual Software Update, Updating with USB, ++Updating Procedure

FUNCTIONS

SOFTWARE UPDATE

ENG

SERVICE

Micro USB to

USB adapter Cable

(not supplied)

UPDATING WITH USB

Samsung may offer updates for the Soundbar's system firmware in the future.

If an update is offered, you can update the firmware by connecting a USB device with the firmware update stored on it to the USB port on your Soundbar.

Note that if there are multiple update files, you must load them onto the USB device singly and use them to update the firmware one file at a time.

Please visit samsung.com or contact the Samsung call centre to receive more information about downloading update files.

++Updating Procedure

1.Connect a Micro USB to USB adapter cable with a male USB 2.0 Micro USB plug (Type B) on one end and a standard female 2.0 USB jack (Type A) on the other end to the micro USB jack on your Soundbar.

●● The Micro USB to USB adapter cable is sold separately. To purchase, contact a Samsung Service Centre or Samsung Customer Care.

2.Follow the steps below to download the product software:

Go to the Samsung website at (samsung.com/sec)  search for the model name - select the customer support option (the option name is subject to change)

3.Save the downloaded software to a USB stick and select "Extract to the folder name" to unzip the folder.

4.Turn off the Soundbar and connect the USB stick containing the software update to the female port on a Micro USB adapter cable.

5.Turn on the Soundbar. Within 3 minutes, UPDATE is displayed and updating begins.

6.After the update is complete, the Soundbar turns off and on again.

●● If the input source has been changed after an update or a reconnection of the power cable, change the input source to TV, or the desired source.

33