Auto Iris Lens Control Cable |
This cable transmits the control signal from the camera to control the lens
E shutter.
Back Focus Control Bar
It controls the back focus.
ALC Lens Setting Switch
This switch sets the Auto Iris lens type for use.
■ DC : When you attach an Auto Iris lens requiring the DC control signal, please put this switch in the DC position.
■VIDEO : When you attach an Auto Iris lens requiring the video control signal, please put this switch in the VIDEO position.
E
AC
ICD-833P/ACDC Rear View
① Power Display LED
When the camera is supplied with power, LED is on.
➁ Video Output Terminal
The monitor video input terminal is connected with this terminal through which the camera video signal comes out.
➂ FACTORY ADJ Input
This terminal is used for camera control at the production plant.
|
|
|
| 1 | TXD | |
1 | 2 | 3 | 4 | 2 | RXD | |
3 | +5V | |||||
|
|
|
| |||
|
|
|
| 4 | GND |
8 | 9 |
