MAKING A CALL

For making or receiving calls the handset has to be subscribed to a system

( shown in the display, see Create Subscription section).

Press the key, the

icon in the display will flash until connection is estab-

lished.

 

Dial the number.

 

Pre-Dial

Press the number to dial (long press on 4 will make a pause, if necessary)

Press and hold < key to delete last digit.

Press the key, the

icon in the display will flash until connection is estab-

lished.

 

Telephone Book

Press the > key to enter the telephone book.

Search for the number either by using the < key or the > key or by pressing the first letter in the name by using the digits 1-9(refer to the Key Functions section).

Press the key, the

icon in the display will flash until connection is estab-

lished.

 

Redial

Redial / CLIP (CLIP = Calling Line Identification Presentation) stack:

Press the < key to enter the redial/CLIP stack.

Search for the number by using the < key or the > key, redialed numbers are marked with REDIAL or name and clip numbers are marked either with CLIP or the name of the person who called and the LED is on.

Press the key, the

icon in the display will flash until connection is estab-

lished.

 

Using the handset on residential systems:

Internal Call Post-Dial:

 

 

 

Press the ALT key

, the icon

in the display will flash.

 

Dial the number of another handset on the base station, the

icon will flash

until the connection is established.

 

 

Internal Call Pre-Dial:

Press the number of another handset on the base station.

Press the ALT key

the

icon will flash until the connection is established.

RECEIVING CALLS

If the phone rings, the call can be answered by pressing the key.

When ringing the LED flashes fast, and the display shows the CLIP (if presented). If it is an external call (or if no CLIP) the display shows:“INCOMING CALL”.

It is possible to stop the ringing signal without answering the call. Press the OK key ( ) and the ringing signal is muted. The display shows:“RINGER MUTED”.

If the handset is used with a headset, it is possible to answer a call by pressing any key on the handset.

DURING A CONVERSATION

Volume Adjust

Use the two keys placed at the right side of the handset for volume control.

Microphone Mute

Press the OK key ( ), MIC. MUTED is showed in the display.

Press the OK key ( ) to enable the microphone again.

78

Page 6
Image 6
Samsung iDCS SLiM manual Making a Call, Receiving Calls, During a Conversation