Changing the Picture Standard
You can select the type of picture which best corresponds to your viewing requirements.
1. Press the MENU button to display the menu. Press the or
button to select “Picture”, then press the ENTER button.
2. Press the ENTER button again, to select “Mode”, then press the ENTER button again.
3. Press the or button to select the desired picture effect. Press the ENTER button.
4. Press the EXIT button to exit.
Dynamic: Selects the picture for
Standard: Selects the picture for optimum display in a normal environment.
Movie: Selects the picture for comfortable display in a dark room.
Custom: Select to view your favorite display settings. (Refer to “Adjusting the Custom Picture”)
| The Picture mode must be adjusted separately for each input source. | |
You can also press the | ||
You can return to the factory defaults picture settings by selecting the “Reset”. | ||
P.MODE button on the remote | (Refer to “Resetting the Picture Settings to the Factory Defaults” on page 10) | |
control to select one of the |
| |
picture settings. |
|
Adjusting the Custom Picture
Your set has several settings which allow you to control picture quality.
1. | To select the desired picture effect, follow the | ||
| “Changing the Picture Standard” instructions number 1 to 3. | ||
2. | Press the | or | button to select a particular item. |
| Press the ENTER button. | ||
3. | Press the | or | button to decrease or increase the value of a |
| particular item, then press the ENTER button. | ||
4. Press the EXIT button to exit.
Contrast: Adjusts the lightness and darkness between objects and the background.
Brightness: Adjusts the brightness of the whole screen.
Sharpness: Adjusts the outline of objects to either sharpen them or make them more dull.
Colour: Adjusts the colours, making them lighter or darker.
Tint (NTSC only): Adjusts the colour of objects, making them more red or green for a more natural look.
The adjusted values are stored according to the selected Picture mode.
