Selecting the Source
You can select among external sources connected to your TV’s input jacks.
1. Press the MENU button to display the menu. Press the ENTER button, to select “Input”.
2. Press the ENTER button again, to select “Source List”.
When no external device is connected to your set, only “TV”, “Ext.1”, “Ext.2”
are activated in the “Source List”. “AV”,
are activated only when they are connected to your set.
3. Select the required device by pressing the | or | button. |
Press the ENTER button.
Press the SOURCE button on the remote control to toggel between all the available source. TV mode can be selected by pressing the TV or P 
/ 
button on the remote control but you cannot select it by pressing the SOURCE button.
Editing the Input Source Names
Name the device connected to the input jacks to make your input 
source selection easier.
1. Press the MENU button to display the menu. Press the ENTER button, to select “Input”.
2. | Press the | or | button to select “Edit Name”, then press the ENTER |
| button. |
|
|
3. | Press the | or | button to select the device that you wish to edit. |
| Press the ENTER button. | ||
4. | Press the | or | button to select the required device. |
| Press the ENTER button. | ||
5.Press the EXIT button to exit.
Teletext Decoder
Most set channels carry “ Teletext ”, pages of written information that provide information such as:
Television programme times.
News bulletins and Weather forecasts.
Sports results.
Subtitles for the hard of hearing.
The Teletext pages are organized according to six categories:
Part | Contents |
ASelected page number.
BBroadcasting station identity.
CCurrent page number or search status.
DDate and time.
EText.
FStatus information.
