Samsung LE40M9 manual Selecting the Source, Editing the Input Source Names

Selecting the Source

You can select among external sources connected to your TV’s input jacks.

1. Press the MENU button to display the menu. Press the ENTER/OK button, to select “Input”.

2.Press the ENTER/OK button again, to select “Source List”.

When no external device is connected to your set, only “TV”, “Ext.1”, “Ext.2” are activated in the “Source List”. “AV”, “S-Video”, “Component”, “PC”,

“HDMI1” , “HDMI2” are activated only when they are connected to your set.

3. Select the required device by pressing the or button. Press the ENTER/OK button.

Press the SOURCE button on the remote control to toggel between all the available source. TV mode can be selected by pressing the TV button, number buttons(0~9), and the P

/ button on the remote control. But it cannot be selected using the SOURCE button.

You can select PC mode by simply pressing the PC button on the remote control.

You can select HDMI mode by simply pressing the HDMI button on the remote control.

Editing the Input Source Names

Name the device connected to the input jacks to make your input source selection easier.

1.	Press the MENU button to display the menu.
	Press the ENTER/OK button, to select “Input”.
2.	Press the	or	button to select “Edit Name”, then press the
	ENTER/OK button.
3.	Press the	or	button to select the device that you wish to edit.
	Press the ENTER/OK button.
4.	Press the	or	button to select the required device.
	Press the ENTER/OK button.

5.Press the EXIT button to exit.

English-24