Samsung LE40M9 manual Setting the PC, Preset Press the PC button to select PC mode

Setting the PC

Coarse and Fine Tuning of the Image (Image Lock):

The purpose of picture quality adjustment is to remove or reduce picture noise.

If the noise is not removed by Fine-tuning alone, then adjust the

frequency as best as possible (coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned on the ENTER/OK of screen.

1. Preset: Press the PC button to select PC mode.

Press the PC button on the

2.	Press the MENU button to display the menu.
	Press the	or	button to select “Setup”, then press the ENTER/OK button.
3.	Press the	or	button to select “PC”, then press the ENTER/OK button.

4.Press the ENTER/OK button to select “Image Lock”.

5.	Press the	or	button to select “Coarse” or “Fine”, then press the
	ENTER/OK button.
6.	Press the	or	button to adjust the screen quality.
	Press the ENTER/OK button.

7. Press the EXIT button to exit.

remote control to select the PC

mode.

Changing the Image Position (Position):

Adjust the PC’s screen positioning if it does not fit the TV screen.

1.Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3.

2.	Press the	or	button to select “Position”, then press the ENTER/OK button.
3.	Press the	or	button to adjusting the Vertical-Position.
	Press the	or	button to adjust the Horizontal-Position.

Press the ENTER/OK button.

4.Press the EXIT button to exit.

Adjusting the PC Screen Automatically (Auto Adjustment):

Auto adjustment allows the PC screen of set to self-adjust to the

incoming PC video signal. The values of fine, coarse and position are adjusted automatically.

1.Follow the “Coarse and Fine Tuning of the Image (Image Lock)”

instructions number 1 to 3.

2. Press the or button to select “Auto Adjustment”, then press the ENTER/OK button.

3.Press the EXIT button to exit.

Initializing the Image Settings (Image Reset):

You can replace all image settings with the factory default values.

1. Follow the “Coarse and Fine Tuning of the Image (Image Lock)” instructions number 1 to 3.

2. Press the or button to select “Image Reset”, then press the ENTER/OK button.

3.Press the EXIT button to exit.

English-43