2Using "PCoIP"
2.4.12Firmwre Update
Using the Firmwre Update page, change the Teradici Firmware.
Configuring the settings
1Set the product and PC IP addresses to enable the product to connect to the PC over a network.
2Enter the IP address set for the product in the URL address field on the PC to access the product administrative web page.
3Log in (Log In) and select Upload 
Firmware. The Firmware Upload page appears. (See the image below.)
4Select a Firmware to replace the logo and press Upload.
5Once upload is complete, the Reset button appears. Click the Reset button to reboot the client. Go to Options 
Information, and view the Firmware Version information.
2 Using "PCoIP" 71