4.1 Information
Press OK key to the Information window.
4.2 Factory Setting
Press OK key to enter into the Factory
Setting window.
Select Yes button and press OK key to return to the factory setting. All searched channels and set information will be erased.
Select No button and press OK key to cancel this operation, or press MENU or EXIT key to cancel and exit.
4.3 Upgrade by USB
1.Upgrade File: Show the Upgrade File.
2.Upgrade Mode: Select between AllCode and Dump. When users switch the
upgrade mode, | Upgrade File | will show the corresponding file according to the | |
table below: |
|
|
|
|
|
| |
Upgrade Mode | File feature |
| |
All code : | File named as "*.abs" |
| |
Main Code: | File named as | *.bin |
|
Radio back: | File named as "*.m2v", |
| |
| the picture will be used |
| |
| as both radio back and |
| |
| menu back |
|
|
|
|
| |
Default db: | File named as "*.bin" |
| |
|
|
|
|
Select the upgrade mode and upgrade file, then you can start upgrade by USB.
3.Press OK key on start button to start receiving the data from USB device. When the USB device is not connected, this item is grey, you can not edit it now.
