2. Installation |
|
1. Press OK key or | key to pop up the "Input |
Password" dialogue, | you can not enter into the |
menu unless the correct password is inputted. The default password is "0000".
2.Press PR+, PR- keys to move the cursor up or down.
3. Press EXIT key or | key to move the focus | |
to the left menu. |
|
|
2.1 Antenna Connection | ||
Press | keys | to select between Motor |
Antenna and Fixed Antenna.
2.2 Satellite List
1.Press PR+, PR- keys to select the satellite up or down. Press OK key to select and mark, and you can press OK key again to cancel the selection and the mark.
2.If there is no satellite, the red colour and blue
colour keys will be invalid.
3.Press red colour key to pop up the Edit Satellite window. Press PR+, PR- keys to move cursor up or down.
Name: User numeric keys to change the name of the satellite, please refer to the Edit Channel Name.
Longitude: You can press 
keys to switch between east longitude and west longitude. After pressing OK key, you can use numeric keys to edit the longitude, press EXIT key or the PR+, PR- keys to exit editing mode. The range of the longitude is from 1to 180 degree. If beyond this range, system will inform you "out of range" when you press yellow colour key on the RCU.
After setting, press yellow colour key to save and exit, while press blue colour key to exit without saving.
