Allied Telesis AT-9724TS specifications Link-State Update Packet, Octets Version No, 111

OSPF Link-State Request Packet
Octets
0	1	2	3	4
Version No.		3	Packet Length
		Router ID
		Area ID

Checksum

Authentication Type

Authentication

Authentication

Link-State Type

Link-State ID

Advertising Router

Figure 6- 103. Link-State Request Packet

Each advertisement requested is specified by its Link-State Type, Link-State ID, and Advertising Router.This uniquely identifies the advertisement, but not its instance. Link-State Request packets are understood to be requests for the most recent instance.

Link-State Update Packet

Link-State Update packets are OSPF packet type 4.These packets implement the flooding of link-state advertisements. Each Link-State Update packet carries a collection of link-state advertisements one hop further from its origin. Several link-state advertisements may be included in a single packet.

Link-State Update packets are multicast on those physical networks that support multicast/broadcast. In order to make the flooding procedure reliable, flooded advertisements are acknowledged in Link-State Acknowledgment packets. If retransmission of certain advertisements is necessary, the retransmitted advertisements are always carried by unicast Link-State Update packets.

The format of the Link-State Update packet is shown below:

OSPF Link-State Update Packet
Octets
0	1	2	3	4
Version No.		4	Packet Length
		Router ID
		Area ID

Checksum

Authentication Type

Authentication

Authentication

Number of Advertisements

Link-State Advertisements

Figure 6- 104. Link-State Update Packet

The body of the Link-State Update packet consists of a list of link-state advertisements. Each advertisement begins with a common 20-byte header, the link-state advertisement header. Otherwise, the format of each of the five types of link-state advertisements is different.

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch 111