VRRP Interface Settings
The following window will allow the user to view the parameters for the VRRP function on the Switch.To view this window, click Configuration > Layer 3 IP Networking > VRRP > VRRP Configuration:
Figure 6- 127.VRRP Configuration window
The following fields are displayed in the window above:
Parameter | Description |
|
Interface Name | An IP interface name that has been enabled for VRRP.This entry must have been previously set in the IP | |
Authentication type | Interfaces table. | |
Displays the type of authentication used to compare VRRP packets received by a virtual router. Possible | ||
| authentication types include | |
| No authentication – No authentication has been selected to compare VRRP packets received by a virtual router. | |
| Simple Text Password – A Simple password has been selected to compare VRRP packets received by a virtual | |
| router, for authentication. | |
| IP Authentication Header – An MD5 message digest algorithm has been selected to compare VRRP packets | |
VRID | received by a virtual router, for authentication. | |
Displays the virtual router ID set by the user.This will uniquely identify the VRRP Interface on the network. | ||
Display | Click the View button to display the settings for this particular VRRP entry. | |
Delete | Click the ✘ to delete this VRRP entry. | |
|
|
|
Click the Add button to display the following window to configure a VRRP interface.
Figure 6- 128.VRRP Interface Settings – Add window
Or, the user may click the hyperlinked Interface Name to view the same window:
The following parameters may be set to configure an existing or new VRRP interface.
Allied Telesyn | 126 |
