Parameter | Description |
|
Time Interval | Select the desired setting between 1s and 60s, where "s" stands for seconds.The default value is one second. | |
Record Number | Select number of times the Switch will be polled between 20 and 200.The default value is 200. | |
ExDefer | Counts the number of packets for which the first transmission attempt on a particular interface was delayed | |
LateColl | because the medium was busy. | |
Counts the number of times that a collision is detected later than 512 | ||
ExColl | packet. | |
Excessive Collisions.The number of packets for which transmission failed due to excessive collisions. | ||
SingColl | Single Collision Frames.The number of successfully transmitted packets for which transmission is inhibited by | |
Coll | more than one collision. | |
An estimate of the total number of collisions on this network segment. | ||
Show/Hide | Check whether or not to display ExDefer, LateColl, ExColl, SingColl, and Coll errors. | |
Clear | Clicking this button clears all statistics counters on this window. | |
View Table | Clicking this button instructs the Switch to display a table rather than a line graph. | |
View Line | Chart Clicking this button instructs the Switch to display a line graph rather than a table. |
|
9-5 Size
The Web Manager allows packets received by the Switch, arranged in six groups and classed by size, to be viewed as either a line graph or a table.Two windows are offered.To select a port to view these statistics for, first select the Switch in the switch stack by using the Unit
Figure 9- 13. Rx Size Analysis window (line graph)
To view the Packet Size Analysis Table, click the link View Table, which will show the following table:
Allied Telesyn | 165 |
