Allied Telesis AT-9724TS Initializing Ports for Port Based, From, Auth PAE State, Backend State

Initializing Ports for Port Based 802.1x

Existing 802.1x port settings are displayed and can be configured using the window below.

Note: Ensure Port Based 802.1x is enabled under Configuration > Advanced Settings.

Click Port Access Entity > PAE System Control > Initialize Port(s) to open the following window:

Figure 6- 79. Initialize Port window (Port-based)

This window allows you to initialize a port or group of ports.The Initialize Port Table in the bottom half of the window displays the current status of the port(s).

This window displays the following information:

Parameter	Description
Unit	Choose the Switch ID number of the Switch in the switch stack to be modified.
From and	To Select ports to be initialized.
Port	A read only field indicating a port on the Switch.
Auth PAE State	The Authenticator PAE State will display one of the following: Initialize, Disconnected, Connecting,, Authenticating,,
Backend State	Authenticated, Aborting, Held, ForceAuth, ForceUnauth, and N/A.
	The Backend Authentication State will display one of the following: Request, Response, Success, Fail, Timeout, Idle,
Port Status	Initialize, and N/A.
	The status of the controlled port can be Authorized, Unauthorized, or N/A.

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch 89