Allied Telesis AT-9724TS specifications Errors, 162

The following fields may be set or viewed:
	Parameter	Description
	Time Interval	Select the desired setting between 1s and 60s, where "s" stands for seconds.The default value is one second.
	Record Number	Select number of times the Switch will be polled between 20 and 200.The default value is 200.
	Bytes	Counts the number of bytes successfully sent from the port.
	Packets	Counts the number of packets successfully sent on the port.
	Unicast	Counts the total number of good packets that were transmitted by a unicast address.
	Multicast	Counts the total number of good packets that were transmitted by a multicast address.
	Broadcast	Counts the total number of good packets that were transmitted by a broadcast address.
	Show/Hide	Check whether or not to display Bytes and Packets.
	Clear	Clicking this button clears all statistics counters on this window.
	View Table	Clicking this button instructs the Switch to display a table rather than a line graph.
	View Line Chart	Clicking this button instructs the Switch to display a line graph rather than a table.

9-4 Errors

The Web Manager allows port error statistics compiled by the Switch's management agent to be viewed as either a line graph or a table. Four windows are offered.

Received (RX)

Click the Received (RX) link in the Error folder of the Monitoring menu to view the following graph of error packets received on the Switch.To select a port to view these statistics for, first select the Switch in the switch stack by using the Unit pull-down menu and then select the port by using the Port pull down menu.The user may also use the real-time graphic of the Switch and/or switch stack at the top of the web page by simply clicking on a port.

Figure 9- 9. Rx Error Analysis window (line graph)

To view the Received Error Packets Table, click the link View Table, which will show the following table:

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch 162