Allied Telesis AT-9724TS specifications Advertisement, Protocol ID

Parameter	Description
Unit	Choose the Switch ID number of the Switch in the switch stack to be modified.
VID (VLAN ID)	Allows the entry of a VLAN ID in the Add dialog box, or displays the VLAN ID of an existing VLAN in the
VLAN Name	Modify dialog box.VLANs can be identified by either the VID or the VLAN name.
	Allows the entry of a name for the new VLAN in the Add dialog box, or for editing the VLAN name in the
Advertisement	Modify dialog box.
	Enabling this function will allow the Switch to send out GVRP packets to outside sources, notifying that they
Type	may join the existing VLAN.
	Displays the type of protocol associated with this VLAN.
Protocol ID	The following parameters allow for the creation of protocol-based VLANs.The Switch supports 15 pre-
	configured protocol-based VLANs plus one user-defined protocol based VLAN where the administrator may
	configure the settings for the appropriate protocol and forwarding of packets (16 total). Selecting a specific
	protocol will indicate which protocol will be utilized in determining the VLAN ownership of a tagged packet.
	Pre-set protocol-based VLANs on the switch include:
	port – Using this parameter will allow the creation of a normal 802.1Q VLAN on the Switch.
	ip – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
	header is concurrent with this protocol.This packet header information is based on the Ethernet protocol.
	rarp – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
	header is concurrent with this protocol.This packet header information is defined by the Reverse Address
	Resolution (RARP) Protocol.
	ipx802dot3 – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
	packet header is concurrent with this protocol.This packet header information is defined by Novell NetWare
	802.3 (IPX - Internet Packet Exchange).
	ipx802dot2 – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
	packet header is concurrent with this protocol.This packet header information is defined by Novell NetWare
	802.2 (IPX - Internet Packet Exchange).
	ipxSnap – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
	header is concurrent with this protocol.This packet header information is defined by Novell and the Sub
	Network Access Protocol (SNAP).
	ipxEthernet2 – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
	packet header is concurrent with this protocol.This packet header information is defined by the Ethernet
	Protocol.
	AppleTalk – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
	packet header is concurrent with this protocol.This packet header information is defined by the AppleTalk
	protocol.
	decLAT – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
	header is concurrent with this protocol.This packet header information is defined by the Digital Equipment
	Corporation (DEC) Local Area Transport (LAT) protocol.
	decOther – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
	packet header is concurrent with this protocol.This packet header information is defined by the Digital
	Equipment Corporation (DEC) Protocol.
	sna802dot2 – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
	packet header is concurrent with this protocol.This packet header information is defined by the Systems
	Network Architecture(SNA) 802.2 Protocol.
	netBios – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
	header is concurrent with this protocol.This packet header information is defined by the NetBIOS Protocol.
	xns – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
	header is concurrent with this protocol.This packet header information is defined by the Xerox Network
	Systems (XNS) Protocol.
	vines – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
	header is concurrent with this protocol.This packet header information is defined by the Banyan Virtual
	Integrated Network Service (VINES) Protocol.
	ipV6 – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the packet
	header is concurrent with this protocol.This packet header information is defined by the Internet Protocol
	Version 6 (IPv6) Protocol.
	userDefined – Using this parameter will instruct the Switch to forward packets to this VLAN if the tag in the
	packet header is concurrent with this protocol defined by the user.This packet header information is defined by
	entering the following information:

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch 61