Allied Telesis AT-9724TS specifications Sntp Settings, Current Time Settings

6-20 SNTP Settings

Current Time Settings

To configure the time settings for the Switch, open the Configuration folder, then the SNTP folder and click on the Current Time Setting link, revealing the following screen for the user to configure.

Figure 6- 58.Time Settings Page

The following parameters can be set or are displayed:

	Parameter	Description
	Current Time: Status
	System Boot Time	Displays the time when the Switch was initially started for this session.
	Current Time	Displays the current time.
	Time Source	Displays the source of the time settings viewed here.
	Current Time: SNTP Settings
	SNTP State	Use this pull-down menu to Enable or Disable SNTP.
	SNTP Primary Server	This is the IP address of the primary server the SNTP information will be taken from.
	SNTP Secondary Server	This is the IP address of the secondary server the SNTP information will be taken from.
	SNTP Poll Interval in Seconds	This is the interval, in seconds, between requests for updated SNTP information.
(30-99999)
	Current Time: Set Current Time
	Year	Enter the current year, if you want to update the system clock.
	Month	Enter the current month, if you would like to update the system clock.
	Day	Enter the current day, if you would like to update the system clock.
	Time in HH MM SS	Enter the current time in hours and minutes, if you would like to update the system clock.
Click Apply to implement your changes.			74
Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch