Allied Telesis AT-9724TS specifications Group Name, Snmp Version, Auth-Protocol, Priv-Protocol

To display the detailed entry for a given user, click on the hyperlinked User Name.This will open the SNMP User Table Display page, as shown below.

		Figure 8- 2. SNMP User Table Display window
The following parameters are displayed:
	Parameter	Description
	User Name	An alphanumeric string of up to 32 characters.This is used to identify the SNMP users.
	Group Name	This name is used to specify the SNMP group created can request SNMP messages.
	SNMP Version	V1 – Indicates that SNMP version 1 is in use.
		V2 – Indicates that SNMP version 2 is in use.
	Auth-Protocol	V3 – Indicates that SNMP version 3 is in use.
		None – Indicates that no authorization protocol is in use.
		MD5 – Indicates that the HMAC-MD5-96 authentication level will be used.
	Priv-Protocol	SHA – Indicates that the HMAC-SHA authentication protocol will be used.
		None – Indicates that no authorization protocol is in use.
		DES – Indicates that DES 56-bit encryption is in use based on the CBC-DES (DES-56) standard.

To return to the SNMP User Table, click the Show All SNMP User Table Entries link.

To add a new entry to the SNMP User Table Configuration, click on the Add button on the SNMP User Table page. This will open the SNMP User Table Configuration page, as shown below.

Figure 8- 3. SNMP User Table Configuration window

The following parameters can be set:

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch 150