Allied Telesis AT-9724TS Time Zone and DST, Minutes, +/- Hhmm DST Repeating Settings

Time Zone and DST

The following are screens used to configure time zones and Daylight Savings time settings for SNTP. Open the Configuration folder, then the SNTP folder and click on the Time Zone and DST link, revealing the following screen.

		Figure 6- 59.Time Zone and DST Settings Page
The following parameters can be set:
	Parameter	Description
	Daylight Saving Time State	Use this pull-down menu to Enable or Disable the DST Settings.
	Daylight Saving Time Offset	Use this pull-down menu to specify the amount of time that will constitute your local DST offset - 30, 60, 90, or
	in Minutes	120 minutes.
	Time Zone Offset from GMT in Use these pull-down menus to specify your local time zone's offset from Greenwich Mean Time (GMT.)
	+/- HH:MM
	DST Repeating Settings	Using repeating mode will enable DST seasonal time adjustment. Repeating mode requires that the DST
		beginning and ending date be specified using a formula. For example, specify to begin DST on Saturday during
	From: Which Day	the second week of April and end DST on Sunday during the last week of October.
		Enter the week of the month that DST will start.
	From: Day of Week	Enter the day of the week that DST will start on.
	From: Month	Enter the month DST will start on.
	From: Time in HH:MM	Enter the time of day that DST will start on.
	To: Which Day	Enter the week of the month the DST will end.
	To: Day of Week	Enter the day of the week that DST will end.
	To: Month	Enter the month that DST will end.
	To: time in HH:MM	Enter the time DST will end.
	DST Annual Settings	Using annual mode will enable DST seasonal time adjustment.Annual mode requires that the DST beginning and
	From: Month	ending date be specified concisely. For example, specify to begin DST on April 3 and end DST on October 14.
		Enter the month DST will start on, each year.
	From: Day	Enter the day of the month DST will start on, each year.
	From: Time in HH:MM	Enter the time of day DST will start on, each year.
	To: Month	Enter the month DST will end on, each year.
	To: Day	Enter the day of the month DST will end on, each year.
	To: Time in HH:MM	Enter the time of day that DST will end on, each year.

Click Apply to implement changes made to the Time Zone and DST window.

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch 75