Following fields can be viewed, 173 | Allied Telesis AT-9724TS

Figure 9- 24.Authenticator Statistics window

The user can specify a switch in a switch stack using that switch’s Unit ID by using the pull down menu in the top left hand corner.The user may also select the desired time interval to update the statistics, between 1s and 60s, where “s” stands for seconds.The default value is one second.

The following fields can be viewed:

Parameter	Description
Port	The identification number assigned to the Port by the System in which the Port resides.
Frames Rx	The number of valid EAPOL frames that have been received by this Authenticator.
Frames Tx	The number of EAPOL frames that have been transmitted by this Authenticator.
Rx Start	The number of EAPOL Start frames that have been received by this Authenticator.
TxReqId	The number of EAP Req/Id frames that have been transmitted by this Authenticator.
RxLogOff	The number of EAPOL Logoff frames that have been received by this Authenticator.
Tx Req	The number of EAP Request frames (other than Rq/Id frames) that have been transmitted by this
Rx RespId	Authenticator.
	The number of EAP Resp/Id frames that have been received by this Authenticator.
Rx Resp	The number of valid EAP Response frames (other than Resp/Id frames) that have been received by this
Rx Invalid	Authenticator.
	The number of EAPOL frames that have been received by this Authenticator in which the frame type is not
Rx Error	recognized.
	The number of EAPOL frames that have been received by this Authenticator in which the Packet Body Length
Last Version	field is invalid.
	The protocol version number carried in the most recently received EAPOL frame.
Last Source	The source MAC address carried in the most recently received EAPOL frame.

Allied Telesyn AT-9724TS High-Density Layer 3 Stackable Gigabit Ethernet Switch

173

Image 174

Allied Telesis AT-9724TS specifications Following fields can be viewed, Rx Invalid Authenticator, Rx Error Recognized, 173

Contents

AT-9724TS Electrical Safety and Emission Statement Table of Contents RIP 133 Preface Purpose of This GuideHow This Guide is Organized Document Conventions Bold font European Support Numbers Returning Products FTP Server Regional Locations Tell Us What You Think Ethernet Technology Fast Ethernet Switching TechnologyIntroduction Gigabit Ethernet Technology Switch Description Features Front Panel Components Installing the SFP portsPorts RFC1493 Bridge Rear Panel Components LED IndicatorsLED Description Side-Panel Components Installing the Switch without a Rack InstallationPackage Contents Before You Connect to the Network Installing the Switch in a Rack Prepare Switch for installation on a desktop or shelf Power Failure Mounting the Switch in a Standard 19 RackPower On External Redundant Power System Connecting the Switch Switch To End NodeSwitch to Hub or Switch Connecting To Network Backbone or Server Stacking and the AT-9724TS Stacking Limitations Utilizing a Ring Topology Stacking in a Ring Architecture Introduction to Switch Management First Time Connecting to the Switch Password Protection Snmp Settings Traps MIBsIP Address Assignment Connecting Devices to the Switch Assigning the Switch an IP Address Introduction to Web-based Switch Configuration Login to Web ManagerIntroduction Web-based User Interface Areas of the User InterfaceAreaFunction Web Pages Configuring The Switch Switch InformationClick the Switch Information link in the Configuration menu Bootp IP AddressDhcp Vlan Name Setting the Switchs IP Address using the Console InterfaceAdvanced Settings Specified or Management Station IP Addresses are assigned Box Information To configure switch ports Port ConfigurationLowest priority number in the stack is the Master switch Priority Stack Speed/Duplex Port DescriptionParameter Description State Flow Control To configure a mirror port Port MirroringLink Aggregation Understanding Port Trunk Groups 10. Link Aggregation Group Configuration window Add Lacp Port Setting 12. Lacp Port Setting and Lacp Port Information window Specified.The default setting is MAC Notification Global SettingsHistory size Setting is 1 second MAC Notification Igmp Versions 1 MAC Notification Port SettingsIgmp Parameter Description Unit Type Meaning Igmp Snooping Vlan ID Static Router Ports Following parameters can be set Spanning Tree802.1s Mstp VID Vlan ID Port Transition States STP Bridge Global Settings802.1w Rapid Spanning Tree Edge Port 21. STP Bridge Global Settings STP compatible MST Configuration Table Msti ID Msti Msti ID of the Cist is 0 and cannot be altered Displays the Msti ID previously set by the userParameter Internal cost 0=Auto Msti Port InformationParameter Description Instance ID Priority Instance Status STP Instance SettingsParameter Description Instance Type Instance Priority External Root Cost Forward DelayParameter Description Designated Root Bridge Regional Root Bridge STP Port Settings Forwarding & Filtering Unicast Forwarding Vlan ID VIDMAC Address Multicast MAC Address Static Multicast ForwardingVID Not be a member of the Static Multicast Group VLANs Understanding Ieee 802.1p Priority Vlan DescriptionIeee 802.1Q VLANs Some relevant terms Filtering 802.1Q Vlan TagsIngress Transmit Bits 39.Adding an Ieee 802.1Q Tag Tagging and Untagging Default VLANsPort Vlan ID Ingress Filtering Vlan Segmentation Switch PortsPort-based VLANs Vlan and Trunk Groups Static Vlan Entry Protocol Type Header in Hexadecimal FormPage Advertisement Protocol ID Gvrp Setting Port Settings Tag None Egress Forbidden Ingress Check Traffic ControlGvrp Acceptable Frame Type Max. Learning Addr Admin StatePort Security Mode Vlan Name MAC Address SwitchPort Lock Entries Be deleted 18 QoS Advantages of QoSUnderstanding QoS Nolimit Disables the limitBandwidth Control Packets Output Scheduling Weight fairQoS Scheduling Mechanism Parameter Description Strict Configuring the Combination Queue Parameter Description Max. PacketsBe specified 802.1p Default Priority 802.1p User Priority 55. Setup Forwarding Ports window Traffic Segmentation System Log Server 57. System Log Servers Add Following parameters can be set Server IP Status Choose Enabled or Disabled to activate or deactivateParameter Description Index Severity Sntp Settings Current Time Settings Minutes +/- Hhmm DST Repeating SettingsTime Zone and DST Enter the month DST will start on, each year Access Profile Table Configuring the Access Profile Table 61.Access Profile Table Ethernet Vlan Dscp Shown below is the Packet Content Mask configuration windowSource IP Mask Destination IP Mask Protocol Port Offset Source IP Access IDReplace Dscp Destination IPPage Source MAC Source Destination MAC Destination 71.Access Rule Configuration Packet Content Mask 72.Access Rule Display window Packet Content Mask Priority Offset Port-Based Network Access Control MAC-Based Network Access ControlSwitch Configure Authenticator 75 .1X Authenticator Settings window Local Users PAE System Control From and ToCapability Auth PAE State Initializing Ports for Port BasedFrom Backend State Reauthenticate Ports for Port Based Initializing Ports for MAC Based Reauthenticate Ports for MAC Based Radius Server Layer 3 IP Networking Layer 3 Global Advanced Settings Setting Up IP Interfaces To setup IP Interfaces on the Switch Network Number IP Address Subnet Mask MD5 Key Table ConfigurationParameter Description Interface Name Secondary Route Redistribution Settings Route Source Metric Type Following parameters may be set or viewed Static/Default RouteIP address of the Static/Default Route ParameterDescription Dest Protocol Src Protocol Type Metric Route Type Validity Range Default Value Route Preference SettingsBackup State IP address above Permanently set on the switch and unconfigurable Static Parameter Description RIPOspf Intra Ospf Inter IP address of the ARP entry Static ARP TableParameter Description IP Address MAC address of the ARP entry RIP Version 1 Message Format RIP Command CodesRIP Configuration RIP 1 Message Setting Up RIP 102 Ospf Cost Link-State AlgorithmShortest Path Algorithm Ospf Shortest Path Tree 104 Areas and Border Routers Link-State Packets105 Simple Password Authentication Ospf AuthenticationMessage Digest Authentication MD-5 Backbone and Area Building Adjacency AdjacenciesDesignated Router Election Adjacencies on Point-to-Point Interfaces Hello Packet On the network Backup Designated Router Interface address on the networkDatabase Description Packet 109 Bit Link-State Request PacketField Description Options MS bit Link-State Update Packet Octets Version No111 Link-State Acknowledgment Packet Link-State Advertisement Formats112 Link State ID ASBR,AS External Link Link State Advertisement HeaderRouter Links Advertisements Link State Checksum Successive Link State Sequence numbers Field Description Type Field Description BitArea Link ID Summary Link Advertisements IP Type of Service that this metric refers toNetwork Links Advertisements Field Description Type of Service that the following cost is relevant to Autonomous Systems External Link AdvertisementsField Description Network Mask Parameter Description Ospf Route ID General Ospf SettingsOspf Area ID Setting Current Route ID Parameter Description Area ID Ospf Interface SettingsStub Default Cost Stub Import Summary LSA Metric Type, as specified in the previous parameter Auth TypeAuth. Key ID Router Retransmit Time Seconds Ospf Virtual Interface Settings Network Number Ospf Area Aggregation SettingsOspf Host Route Settings Lsdb Type Following fields are configured for Ospf host route Dhcp / Bootp RelayDhcp / Bootp Relay Information Ospf domain DHCP/BootP Relay Settings DNS Relay DNS Relay Static Settings Domain Name ResolutionConfiguring DNS Relay Information Mapping Domain Names to Addresses Vrrp Configuration Non-owner response Ping125 Vrrp Interface Settings VridDisplay Vrid Admin. StatePreempt Mode Critical IP Address Virtual Router State Virtual IP AddressVirtual MAC Address Master IP Address Igmp Interface Configuration IP Multicast Routing Protocol129 Dvmrp Interface Settings Dvmrp Interface ConfigurationDvmrp Global Setting 130 Neighbor Timeout Interval PIM-DM Interface ConfigurationPIM-DM Configuration Probe Interval Join/Prune Interval Previously defined IP interfaceDisplays the IP address for the IP interface named above Seconds User Accounts Security ManagementSecurity IP 133 User Account Management Admin and User PrivilegesManagement Admin User 134 Access Authentication Control Policy & Parameters135 Login Method List Applications Authentication SettingsAuthentication Server Group Settings Enable Method List 137 Authentication Server Hosts TimeoutRetransmit Login Method Lists 139 Enable Method Lists 140 Method 1, 2, 3 Local Enable PasswordParameter Description Method List Name Method list ParameterDescription Enable AdminLocal Enabled field will result in a fail message 142 Parameter Description Certificate Type Secure Socket Layer SSLDownload Certificate Key File Name Cert.der Configuration 144 SSH Configuration Secure Shell SSHSSH Algorithm AES192-CBC 3DES-CBCAES128-CBC AES256-CBC HMAC-MD5 SSH User AuthenticationHMAC-SHA1 HMAC-RSA Host Name Auth. ModeParameter Description User Name Host IP Snmp Manager Snmp User Table Auth-Protocol Group NameSnmp Version Priv-Protocol Snmp View Table 151 Subtree OID Snmp Group TableParameter Description View Name 152 Snmp Community Table Configuration Snmp Host Table Access RightContents of the MIBs on the Switch Parameter Description Community Name Community String or Snmp Engine IDParameter Description Host IP Address Snmp V3 User Name CPU Utilization MonitoringPort Utilization Parameter Description Time Interval Packets Received RX157 158 UMB Cast RX 159 Transmitted TX 160 Tx Packets Analysis window table for Bytes and Packets 161 Errors 162 Under Size Crc ErrorRecord Number Over Size 164 ExColl Packet SizeLateColl Because the medium was busy SingColl Stacking Information Runtime Version Device StatusProm Version A Star topology Version Illustrations MAC Address 168 Address Switch History LogFind Down menus Vlan ID of the Vlan the port is a member Parameter Description Sequence Igmp Snooping GroupIgmp Snooping Forwarding 170 Port Access Control Authenticator StateBrowse Router Port Parameter Description Auth PAE State Authenticator StatisticsCapability is disabled 802.1x Following fields can be viewed Rx Invalid AuthenticatorRx Error Recognized 173 Authenticator Session Statistics Authenticator Diagnostics Radius Authentication Radius Accounting 177 Layer 3 Feature Browse IP Address178 Browse IP Multicast Forwarding Table Browse Routing TableBrowse ARP Table 179 Browse Ospf Lsdb Table Browse Igmp Group TableOspf Monitoring 180 Browse Ospf Neighbor Table Ospf Virtual Neighbor Dvmrp Monitoring Browse Dvmrp Routing TableBrowse Dvmrp Neighbor Address Table PIM Neighbor Address Table Browse Dvmrp Routing Next Hop TablePIM Monitoring 183 Download Configuration File Switch MaintenanceTftp Service Download Firmware Upload Log Upload ConfigurationMultiple Image Services Firmware Information BOX Config Firmware ImageUpdate Time Size Ping Test Parameter Description ImageActive Save Changes ResetParameter Description Save Only save config 188 Logout Reboot DeviceFollowing menu is used to restart the Switch 189 Physical & Environmental Appendix a Technical SpecificationsGeneral EMC Performance 191 Geräte DER Klasse Lightning Danger Electrical Type Class 1 EquipmentGefahr Durch Blitzschlag Vorsicht Fare Under Uvejr Elektrisk Klasse 1-UDSTYRElektrische Toestellen VAN Klasse Pericolo DI Fulmini Métalliques accessibles à l’utilisateurSalamaniskuvaara Elettricità Dispositivi DI Classe Peligro DE Rayos Fare for LynnedslagFare Arbeid Ikke på utstyr eller Kabler i Tordenvær Electrico Equipo DEL Tipo Clase Fara FÖR Blixtnedslag Elektriskt TYP Klass 1 Utrustning196